TP-Link TL-SL5428E Reference Manual page 112

fqv3z"cwvj/ogvjqf"
Fguetkrvkqp"
The fqv3z" cwvj/ogvjqf command is used to configure the Authentication
Method of IEEE 802.1X and the default 802.1X authentication method is
"eap-md5". To restore to the default 802.1X authentication method, please use
pq fqv3z"cwvj/ogvjqf command.
U{pvcz"
fqv3z"cwvj/ogvjqf"{ pap | eap-md5 }
pq"fqv3z cwvj/ogvjqf
Rctcogvgt"
pap | eap-md5 ——Authentication Methods.
pap: IEEE 802.1X authentication system uses extensible authentication protocol
(EAP) to exchange information between the switch and the client. The
transmission of EAP packets is terminated at the switch and the EAP packets
are converted to the other protocol (such as RADIUS) packets for transmission
eap-md5: IEEE 802.1X authentication system uses extensible authentication
protocol (EAP) to exchange information between the switch and the client. The
EAP protocol packets with authentication data can be encapsulated in the
advanced protocol (such as RADIUS) packets to be transmitted to the
authentication server.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Configure the Authentication Method of IEEE 802.1X as "pap":
VN/UN764:G*eqphki+%fqv3z"cwvj/ogvjqf"pap"
fqv3z"iwguv/xncp*inqdcn+"
Fguetkrvkqp"
The fqv3z" iwguv/xncp command is used to enable the Guest VLAN function
globally. To disable the Guest VLAN function, please use pq"fqv3z"iwguv/xncp
command.
VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
95