TP-Link TL-SL5428E Reference Manual page 295

Pqvg<" "
The upor/ugtxgt" vtcru" xncp" command without any parameter is used to
enable the both traps. And the pq upor/ugtxgt"vtcru"xncp"command without
any parameter is used to disable the the both traps.
U{pvcz"
upor/ugtxgt"vtcru"xncp"[ create | delete ]
pq"upor/ugtxgt"vtcru"xncp [create | delete ]
Rctcogvgt"
create —— Enable VLAN-created trap. It is sent when new VLAN is created
successfully.
delete —— Enable VLAN-deleted traps. It is sent when VLAN is deleted
successfully.
Eqoocpf"Oqfg" "
Global Configuration Mode
Gzcorng"
Enable all SNMP extended VLAN-related traps for the switch：
VN/UN764:G*eqphki+%"upor/ugtxgt"vtcru"xncp"
Enable VLAN-created trap only for the switch:
VN/UN764:G*eqphki+%"upor/ugtxgt"vtcru"xncp"create"
toqp"jkuvqt{"
Fguetkrvkqp"
The toqp"jkuvqt{ command is used to configure the history sample entry. To
return to the default configuration, please use pq" toqp" jkuvqt{ command.
RMON (Remote Monitoring), basing on SNMP architecture, functions to monitor
the network. History Group is one of the commonly used RMON Groups. After a
history group is configured, the switch collects network statistics information
periodically, based on which the management station can monitor network
effectively.
U{pvcz"
toqp" jkuvqt{" index kpvgthceg" { hcuvGvjgtpgv port | ikicdkvGvjgtpgv port }
[ kpvgtxcn"seconds ] [ qypgt"owner-name ]
pq"toqp"jkuvqt{ index
VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
278