TP-Link TL-SL5428E Reference Manual page 294

Pqvg<" "
The upor/ugtxgt" vtcru" oce" command without any parameter is used to
enable all the four types of traps. And the pq upor/ugtxgt" vtcru" oce"
command without any parameter is used to disable all the four types of traps
U{pvcz"
upor/ugtxgt"vtcru"oce"[ new | full | learn-mode-change | max-learned ]
pq"upor/ugtxgt"vtcru"oce [ new | full | learn-mode-change | max-learned ]
Rctcogvgt"
new —— Enable new MAC address trap. It is sent when the switch learns new
MAC address including dynamic address, static address and filter address.
full —— Enable MAC address table trap. It is sent when the MAC address table
is full.
learn-mode-change —— Enable MAC address learn-mode-change trap. It is
sent when MAC address learning mode of the switch changes.
max-learned —— Enable MAC address max-learned trap. It is sent when the
amount of learned MAC address reaches the limit which is configured in port
security module.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Enable all SNMP extended MAC address-related traps for the switch:
VN/UN764:G*eqphki+%"upor/ugtxgt"vtcru"oce"
Enable new MAC address trap only for the switch:
VN/UN764:G*eqphki+%"upor/ugtxgt"vtcru"oce"new"
upor/ugtxgt"vtcru"xncp"
Fguetkrvkqp"
The upor/ugtxgt" vtcru" xncp" command is used to enable SNMP extended
VLAN-related traps which include two types: create and delete. To disable this
function, please use pq"upor/ugtxgt"vtcru"xncp"command.
VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
277