U{pvcz"
uykvejrqtv"rtkxcvg/xncp"{ promiscuous | host"}
pq"uykvejrqtv"rtkxcvg/xncp"{ promiscuous | host"}
Rctcogvgt"
promiscuous | host —— Configure the private VLAN mode for the switchport.
Eqoocpf"Oqfg"
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
Gzcorng"
Configure Fast Ethernet port 3 as "host":
VN/UN764:G*eqphki+%kpvgthceg"hcuvGvjgtpgv"1/0/3
VN/UN764:G*eqphki/kh+%uykvejrqtv"rtkxcvg/xncp"host"
uykvejrqtv"rtkxcvg/xncp"jquv/cuuqekcvkqp"
Fguetkrvkqp"
The uykvejrqtv"rtkxcvg/xncp"jquv/cuuqekcvkqp"command is used to add host
type port to private VLAN. To remove the port from Private VLAN, please use pq"
uykvejrqtv"rtkxcvg/xncp"jquv/cuuqekcvkqp command.
U{pvcz"
uykvejrqtv"rtkxcvg/xncp"jquv/cuuqekcvkqp primary_vlan_id secondary_vlan_id
pq"
secondary_vlan_id
Rctcogvgt"
primary-vlan-id —— Primary VLAN ID, ranging from 2 to 4094.
secondary-vlan-id —— Secondary VLAN ID, ranging from 2 to 4094.
Eqoocpf"Oqfg"
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
VN/UN764:G
uykvejrqtv"
rtkxcvg/xncp"
LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
jquv/cuuqekcvkqp
51
primary_vlan_id
Need help?
Do you have a question about the TL-SL5428E and is the answer not in the manual?