TP-Link TL-SL5428E Reference Manual page 166

VN/UN764:G*eqphki+%"kpvgthceg"xncp"1"
VN/UN764:G*eqphki/kh+%"krx8"cfftguu"tc"
krx8"cfftguu"gwk/86"
Fguetkrvkqp"
This command is used to manually configure a global IPv6 address with an
extended unique identifier (EUI) in the low-order 64 bits on the interface. Specify
only the network prefix. The last 64 bits are automatically computed from the
switch MAC address. To remove an EUI-64 IPv6 address from the interface,
please use the pq"krx8"cfftguu"gwk/86 command.
U{pvcz"
krx8"cfftguu"ipv6-addr gwk/86
pq"krx8"cfftguu ipv6-addr gwk/86
Rctcogvgt"
ipv6-addr —— Global IPv6 address with 64 bits network prefix, for example
3ffe::1/64.
Eqphkiwtcvkqp"Oqfg"
Interface Configuration Mode (interface vlan)
Gzcorng"
Configure an EUI-64 global address on the interface with the network prefix
3ffe::1/64
VN/UN764:G*eqphki+%"kpvgthceg"xncp"1"
VN/UN764:G*eqphki/kh+%"krx8"cfftguu"3ffe::1/64"gwk/86"
krx8"cfftguu" "
Fguetkrvkqp" "
This command is used to manually configure a global IPv6 address on the
interface. To remove a global IPv6 address from the interface, please use pq"
krx8"cfftguu"command.
U{pvcz"
krx8"cfftguu ipv6-addr
VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
149