TP-Link TL-SL5428E Reference Manual page 118

U{pvcz"
fqv3z"rqtv/ogvjqf"{ mac-based | port-based }
pq"fqv3z"rqtv/ogvjqf"
Rctcogvgt"
mac-based | port-based ——The control type for the port.
mac-based: Any client connected to the port should pass the 802.1X
authentication for access.
port-based: All the clients connected to the port can access the network on the
condition that any one of the clients has passed the 802.1X Authentication.
Eqoocpf"Oqfg"
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
Gzcorng"
Configure the Control Type for Gigabit Ethernet port 25 as "port-based":
VN/UN764:G*eqphki+%kpvgthceg"ikicdkvGvjgtpgv"1/0/25"
VN/UN764:G*eqphki/kh+%fqv3z"rqtv/ogvjqf"port-based"
ujqy"fqv3z"inqdcn"
Fguetkrvkqp"
The ujqy"fqv3z"inqdcn"command is used to display the global configuration of
801.X.
U{pvcz"
ujqy"fqv3z"inqdcn"
Eqoocpf"Oqfg"
Privileged EXEC Mode and Any Configuration Mode
Gzcorng"
Display the configuration of 801.X globally:
VN/UN764:G*eqphki+%ujqy"fqv3z"inqdcn"
VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
101