TP-Link TL-SL5428E Reference Manual page 116

U{pvcz"
fqv3z"
pq"fqv3z"
Eqoocpf"Oqfg"
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
Gzcorng"
Enable the IEEE 802.1X function for the Fast Ethernet port 1:
VN/UN764:G*eqphki+%kpvgthceg"hcuvGvjgtpgv"1/0/1"
VN/UN764:G*eqphki/kh+%fqv3z"
fqv3z"iwguv/xncp*kpvgthceg+"
Fguetkrvkqp"
The fqv3z"iwguv/xncp command is used to enable the guest VLAN function for
a specified port. To disable the Guest VLAN function for a specified port, please
use pq"fqv3z"iwguv/xncp command. Please ensure that the Control Type of the
corresponding port is port-based before enabling the guest VLAN function for it.
U{pvcz"
fqv3z"iwguv/xncp"
pq"fqv3z"iwguv/xncp"
Eqoocpf"Oqfg"
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
Gzcorng"
Enable the Guest VLAN function for Fast Ethernet port 2:
VN/UN764:G*eqphki+%kpvgthceg"hcuvGvjgtpgv"1/0/2"
VN/UN764:G*eqphki/kh+%fqv3z"iwguv/xncp"
VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
99