TP-Link TL-SL5428E Reference Manual page 132

Gzcorng"
Enable SSH v2:
VN/UN764:G*eqphki+%kr"uuj"xgtukqp"v2
kr"uuj"vkogqwv"
Fguetkrvkqp"
The"kr"uuj"vkogqwv"command is used to specify the idle-timeout time of SSH.
To restore to the factory defaults, please use kr"uuj"vkogqwv"command.
U{pvcz"
kr"uuj"vkogqwv"value
pq"kr"uuj"vkogqwv
Rctcogvgt"
value — — The Idle-timeout time. During this period, the system will
automatically release the connection if there is no operation from the client. It
ranges from 1 to 120 in seconds. By default, this value is 120.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Specify the idle-timeout time of SSH as 100 seconds:
VN/UN764:G*eqphki+%kr"uuj"vkogqwv"100
kr"uuj"ocz/enkgpv"
Fguetkrvkqp"
The"kr"uuj"ocz/enkgpv"command is used to specify the maximum number of the
connections to the SSH server. To return to the default configuration, please use
pq"kr"uuj"ocz/enkgpv"command.
U{pvcz"
kr"uuj"ocz/enkgpv"num
pq"kr"uuj"ocz/enkgpv
Rctcogvgt"
num —— The maximum number of the connections to the SSH server. It
ranges from 1 to 5. By default, this value is 5.
VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
115