TP-Link TL-SL5428E Reference Manual page 314

Gzcorng"
Enable NTDP function globally, and specify NTDP Hops as 5, NTDP Interval
Time as 30 minutes:
VN/UN764:G*eqphki+%enwuvgt"pvfr" "
VN/UN764:G*eqphki+%enwuvgt"pvfr"vkogt"kpvgtxcn/vkogt"30
VN/UN764:G*eqphki+%enwuvgt"pvfr"jqr"5"
enwuvgt"gzrnqtg"
Fguetkrvkqp"
The enwuvgt" gzrnqtg command is used to enable the topology information
collecting function manually.
U{pvcz"
enwuvgt"gzrnqtg"
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Enable the topology information collecting function manually:
VN/UN764:G*eqphki+%enwuvgt"gzrnqtg
enwuvgt"
Fguetkrvkqp"
The enwuvgt command is used to configure cluster functions of a specified port.
To return to the default configuration, please use pq"enwuvgt command.
U{pvcz"
enwuvgt"[pfr { disable | enable }] [pvfr { disable | enable }]
pq"enwuvgt"
Rctcogvgt"
ndp —— Enable/ Disable NDP function for the port. By default, it is enabled.
ntdp —— Enable/ Disable NTDP function for the port. By default, it is enabled.
Eqoocpf"Oqfg"
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
297