Bronpi hydro series Installation, Operating And Servicing Instruction page 47

Submenu 03.02. Daily Programme
To choose the daily program we need to go to the following screen (see drawing
D54):
By pressing just once button nº 7 we access to the daily programming submenu. By
default, it will show the following screen (see drawing D55).
We need to change the option "OFF" to "ON" by pressing the buttons nº1 and nº2 in
order to confirm the daily programme.
Now we need to choose the time that we would like the insert or thermo-stove to be
switched ON. To do this, there are 2 times available to start and 2 to stop the boiler:
START 1 and STOP 1; START 2 and STOP 2.
For example:
Start at 09:00 hours / stop at 14:30 hours.
Start at 20:30 hours / stop at 23:00 hours.
From the previous screen, we press button nº 7 and it will show up (see drawing
D56):
By pressing nº1 and nº2 buttons we modify the value "OFF" and we set the time of
the first start hour (see drawing D57):
In this same way we can proceed to set the first time to stop (see drawing D58 and
D59):
In case that you may want to set up just one time to start and stop, the options START
2 and STOP 2 should be "OFF".
If you want to set another on and off schedule, introduce the values of the second
schedule in the same way that is explained previously. This way we will have set the
program schedule with two starting hours and two stop hours.
It is also possible to schedule one automatic start hour and manual stop hour (or vice
versa).
Example: START 1: 08:00 hours and STOP 1: "off"
or
START 1: "off" and STOP 1: 22:00 hours.
Sub-menu 03-03- Weekly programme
NOTE: Please, make the set up carefully in order to avoid program intermeshing.
Or turning off the thermo-stove in a different program, at a time when you have
set it to run from an alternative programme.
If we intend to make a weekly set up we need to take into account that, in that case,
we have 4 different times to start and stop. So we need to ascribe to every day of
the week the activation or not, as appropriate.
In order to activate them we need to start from the following screen (see drawing
D60).
By pressing just once button nº 7 we access the weekly programming submenu. By
default, it will show the following screen (see drawing D61).
We need to change option "OFF" to "ON" by pressing buttons no.1 and no.2. In this
way we are confirming that the weekly set up has been selected:
Now, we only need to choose the time. We have 4 different times available to start
and stop (see drawings D62 and D63).
- PROGRAMME 1: START 1 and STOP 1
- PROGRAMME 2: START 2 and STOP 2
- PROGRAMME 3: START 3 and STOP 3
- PROGRAMME 4: START 4 and STOP 4
After this, we need to select the activation or deactivation of each programme
depending on the day of the week. For example (see drawing D64)
Programme 1: Monday (ON), Tuesday (ON), Wednesday (OFF), Thursday (OFF),
Friday (ON), Saturday (ON), and Sunday (OFF.)
Programme 2: Monday (OFF), Tuesday (OFF), Wednesday (ON), Thursday (OFF), Friday (OFF), Saturday (ON), and Sunday (ON.)
Programme 3: Monday (OFF), Tuesday (ON), Wednesday
(ON), Thursday (ON), Friday (ON), Saturday (ON), and
Sunday (OFF.)
Programme 4: Monday (ON), Tuesday (ON), Wednesday
(OFF), Thursday (OFF), Friday (OFF), Saturday (OFF),
and Sunday (ON.)
Thanks to this type of setting we can combine 4 different
times throughout the days of the week, but always
keeping in mind not to superimpose or intermesh the
times.
INSTALLATION, OPERATING AND SERVICING INSTRUCTIONS
M-3-2
PROGRAMME
DAY
MENU
off
M-3-2-02
START 1
DAY
MENU
off
M-3-2-03
STOP 1
DAY
MENU
M-3-3
PROGRAMME
WEEKLY
MENU
12:00 18:15
M-3-3-03 M-3-3-02
START STOP
PROG-1 PROG-1
MENU
D62
46
off
M-3-2-01
PROGRAMME
DAILY
MENU
D54
09:00
M-3-2-02
START 1
DAY
MENU
D56
14:30
M-3-2-03
STOP 1
DAY
MENU
D58
off
M-3-3-01
PROGRAMME
WEEKLY
MENU
D60
on
M-3-3-04
MONDAY
PROG-1
MENU MENU
D63
HYDRO SERIES RADIOFREQUENCY
D55
D57
D59
D61
D64