Bronpi OXFORD Installation, Operating And Servicing Instructions
Hide thumbs
Also See for OXFORD:
- Installation, operation and servicing instructions (109 pages) ,
- Instruction manual (23 pages)
Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Bronpi OXFORD
Summary of Contents for Bronpi OXFORD
- Page 1 INSTRUCCIONES DE INSTALACIÓN,USO Y MANTENIMIENTO ESTUFAS INSTALLATION, OPERATING AND SERVICING INSTRUCTIONS STOVES INSTRUCTIONS D’INSTALLATION, D’UTILISATION ET D’ENTRETIEN POÊLES INSTRUÇÕES DE INSTALAÇÃO, USO E MANUTENÇÃO AQUECEDORES ISTRUZIONI DI INSTALLAZIONE, USO E MANUTENZIONE STUFE...
-
Page 2: Table Of Contents
2.1. SPECIFICATIONS ACCORDING TO THE MODEL 23 2.1.1. SYDNEY-T AND LOUVRE 23 2.1.2. MONZA 24 2.1.3. OXFORD 24 2.1.4. ORDESA 24 2.1.5. ETNA AND DERBY 9 / DERBY 14 24 2.1.6. DOVER 25 2.1.7. -
Page 3: General Warnings
The smoke baffle-plate (according to the models). Inside the ash pan: “cold hands” handle can be found in Oxford model. All the others models don’t have this kind of handle. The equipment is made of several elements of steel sheets welded, with different thickness, and, depending on the model, pieces of cast iron or vermiculite (refractory material that covers the walls). - Page 4 There are many others models such as Avila, Tudela, Sintra, Suiza, Suiza-Inox, Sena Plus, Soria and Oxford whose entry of air exists but it is not adjustable (see drawing D7). Double combustion Some models of the stoves include a double combustion. With this system we get a second preheated entry air inside the combustion chamber.
- Page 5 The models Sydney, Louvre, Dover, Oxford, Etna, Ordesa, Bremen, Preston, Derby, Bury and Altea do not include this grille. In the models Croacia, Versalles, Valencia, Sena Plus, Gijón, Gijón-H, Lerma and Lerma-H, this grill is adjustable in two heights depending on the slot of the lateral guide that you use.
-
Page 6: Specifications According To The Model
(see drawing D18). In the models Oxford, Preston, Derby, Bury and Ordesa, to make the change of the collar you have to follow the next steps: First of all, remove the baffle plate. -
Page 7: Monza
Finally turn the firebox approximately 45º to get it out by the door of the stove (see drawing D26). The model Oxford also includes a handle with a double function: remove the ash pan and apply over the pull of the rotating cast doing possible to move it avoiding burnings (see drawing D27). -
Page 8: Etna And Derby 9 / Derby 14
2.1.5. ETNA AND DERBY 9 / DERBY 14 The models Etna, Derby 9 and Derby 14 have a door on the right side whose function is to load fuel (see drawing D30). In the Etna stove, it is included a handle to remove the ash pan which is hidden behind the lower door (see drawing D31). In the model Etna the handle of the side door is type “cold hands”, it is advisable to remove the handle in order to avoid its heating and deterioration. -
Page 9: Croacia-T
2.1.8. CROACIA-T This model of stove is equipped with a turbine of 225 m3/h suitable to improve the distribution of the heat through the air circulation of the environment. The air circulation can be regulated by a switch of three positions located in the bottom right side (see drawing D37). -
Page 10: Versalles
2.1.10. VERSALLES Versalles-C In order to install the Versalles-C series, a metallic Z-shaped piece is provided, that you have to screw on the wall and will support all the weight (see drawing D40). IMPORTANT!!!: it is necessary to assure that the wall will support the weight of the fireplace (and the weight of the wood). It is not recommended to install the fireplace on walls made of materials that are not able to support the weight or made of combustible materials. -
Page 11: Installation And Safety Instructions
In order to open the oven door, it is necessary to use the space in the side of the door and pull it (see drawing D45). WARNING!! In both cases, if the fire is lit, we recommend that you use the thermal glove incorporated in order to use the regulations and avoir burns. - Page 12 Therefore, it is essential that it is made perfectly and that it is subjected to maintenance operations in order to keep it in good condition (many of the claims due to malfunctioning reasons refer exclusively to a bad draft). The chimney can be made of masonry or metallic pipe compound.
-
Page 13: Connection Of The Stove To The Chimney
In the case that there are chimneys placed side by side, The chimney can’t have obstacles around 10 m towards one of them must exceed to the other at least 50 cm in order walls or trees. Otherwise, raise it at least 1 m above the to avoid pressure movements among them obstacle. -
Page 14: Fuels Allowed/Not Allowed
INSUFFICIENT MULTIFUEL MODELS The Oxford, Etna and Ordesa models are MULTIFUEL models and only these models can be used with mineral carbon as a fuel. You can use some of the two fuels without any change in your stove. STARTUP (FIRST IGNITIONS) In order to ignite the fire, we recommend using small wood strips with paper or other means such as fire starters. -
Page 15: Servicing And Care
It is recommended to use anti-soot envelopes during the operation of the stove at least once a week. These envelopes are placed directly on the fire and you can buy them in the same Bronpi distributor where you bought your stove. -
Page 16: External Cleaning
For this reason, it would be necessary to change them. You can find this spare part in the same Bronpi distributor where you bought your stove. - Page 17 Descarga este manual en versión digital. Download this manual in digital version. Télécharger ce manuel en version digitale. Scarica questo manuale in versione digitale. Baixe o manual em versão digital. Para cualquier consulta, por favor, diríjase al distribuidor donde fue adquirido. Please, do not hesitate to contact your dealer for further information.