Lock The Projector; Kensington Lock - Barco F50 User Manual

7.2

Lock the projector

PIN code
Main Menu — Settings — Pin code
Projector access and operation can be regulated using a 4 digit PIN code.
The default setting for the PIN is DISABLED. The factory set PIN code is '1234'.
Users can set their own PIN code. To do this, go to Main Menu — Settings — PIN code — Change PIN code.
The system will issue a prompt for the current PIN code. Once this is successfully entered, it will prompt the user to enter and then
confirm a new 4 digit code. When this is done, click OK to set the code and exit the submenu.
Users have three attempts to correctly enter the PIN. After 3 consecutive failed attempts, the projector will
automatically be locked and a PUK code will be needed to unlock the projector.
If the PUK code is entered incorrectly 3 consecutive times, the projector will be locked and can only be un-
locked by an authorized Barco service partner. Proof of purchase will be required to unlock the projector.
The PUK code for each projector is individual and cannot be used with other projectors. Your projector PUK
code is provided with your original packaging.

Kensington Lock

A lock slot (reference 1, image 7-1)is located at the back of the projector for use with the Kensington®™ Lock Slot (K-Slot) security
system.
1
Image 7-1
601–0307–00 F50 25/02/2016
7. Change projector settings
65