The 3D Menu - Barco F50 User Manual

12. Stereoscopic multichannel setup

12.3 The 3D menu

3D
Main Menu — 3D — 3D
This menu is used for setting the 3D mode. There are four mode options:
Mode
Off
Frame sequential
Side-by-side
Dual head
Dual head setup
This menu option allows the user to select left eye and right eye input sources. Some combinations are not possible, see matrix
below for more information:
DP1
✖
DP1
✔
DP2
✔
HDBaseT
✔
DVI-S
✔
HDMI
✖
DVI-D
✔
VGA
3G SDI (A) ✔
3G SDI (B) ✔
3D Glass sync delay
Main Menu — 3D — 3D Glass sync delay
Some shutter glasses may need the synchronization pulse to be shifted in time to correct ghosting occurring between the left and
the right eye.
This menu option enables the user to set this delay (0–359°) in increments of 1°.
Swap eyes
Main Menu — 3D — Swap eyes
Use this to swap the order of the eyes (L/R) for 3D glass synchronization.
108
Description
3D is off. Standard 2D projection.
Every other input frame is interpreted as the left eye frame and the other is interpreted as the
right eye frame. For sources up to 120 Hz.
The left half of every input frame is used as the left eye output frame and the right half of every
input frame is used as the right eye output frame. For sources up to 60 Hz.
User selects the input sources for left and right eye manually. For sources up to 60 Hz. See
next section for more information.
DP2 HDBaseT DVI-S
✔ ✔ ✔
✖
✔ ✔
✖ ✖
✔
✖ ✖
✔
✔ ✔ ✔
✖ ✖ ✖
✔ ✔ ✔
✔ ✔ ✔
✔ ✔ ✔
HDMI DVI-D VGA
✖
✔ ✔
✖
✔ ✔
✖
✔ ✔
✖
✔ ✔
✖ ✖
✔
✖ ✖ ✖
✖ ✖
✔
✖
✔ ✔
✖
✔ ✔
3G SDI (A) 3G SDI (B)
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✖ ✖
✔ ✔
✖
✔
✖
✔
601–0307–00 F50 25/02/2016