Barco F50 User Manual page 107

Setting
[3D source] phase
[3D] display sync
[3D display] frequency
[3D display] status
[3D display] phase
601–0307–00 F50 25/02/2016
Value
Drifting, free running
Free running
Slider bar
Source / Sync 1 / Sync 2 /
Sync 3
XX Hz
Unstable
Free running
Locked
Drifting, locked
Slider bar
11. Multichannel installations
Description
Display and source signals
are not synchronized.
Time taken to complete a
single input phase.
Source sync information.
Current frequency (Hz)
Frequency of display and
source signals is not
synchronized.
Display and source signals
are not synchronized.
Display and source signals are
synchronized.
Display and source signals are
synchronized but drifting.
Time taken to complete a
single input phase.
Comment
@60hz, 1 phase is equal to 10
seconds.
Lack of synchronization
between display and source
signal frequency may prevent
projector processing and
displaying image properly, or
at all.
Asynchronous display and
source signal may prevent
projector processing and
displaying image properly, or
at all.
May cause interference to
signal and produce artefacts
in image.
@60hz, 1 phase is equal to 10
seconds.
103