User Interface - Barco F50 User Manual

3.4

User interface

General
The primary user interface for the F50 is the On Screen Display (OSD) system. The OSD is a menu—based interface. Topics are
sorted and displayed by main (topic) — sub (topic) — sub (topic).
There are six (6) main menu topics, each represented by a graphical icon: 3D, picture, installation, settings, language, status.
When a main topic is active, the icon is colored, as illustrated below. An inactive topic is displayed in grayscale.
Image 3-3
Navigation and selection
Navigation of the OSD is done primarily using the arrow buttons — left, right, up, down. All navigation and selection occurs dynam-
ically.
If there is a subtopic available, an arrow will be displayed at the right hand side of the menu, as illustrated in image 3-4 reference 1.
Expanding a menu topic is done using the right arrow. To collapse a submenu topic, use the left arrow. To confirm a selection, for
example 'back', use the ok button on your control interface.
Image 3-4
601–0307–00 F50 25/02/2016
1 1
3. Getting to know the projector
19