Synchronization Menu 2D - Barco F50 User Manual

11.4 Synchronization menu 2D

2D frame lock
Main menu — Installation — Synchronization — 2D frame lock
Used to define which display source will be used for synchronization signal.
See table below for more information:
Menu option
Source
Sync 1,2,3
2D Sync 1
Main menu — Installation — Synchronization — [2D] Sync 1
This menu option is used to select which signal the Sync 1 connector shall send out.
When a Sync in connector (Sync 1,2,3) is used for source or display synchronization it will automatically be
configured as 'input' and it will not be possible to select any type of output for this connector.
Menu option
Input
Display sync
Sync 2
Sync 3
2D Sync 2
Main menu — Installation — Synchronization — [2D] Sync 2
This menu option is used to select which signal the Sync 1 connector shall send out.
When a Sync in connector (Sync 1,2,3) is used for source or display synchronization it will automatically be
configured as 'input' and it will not be possible to select any type of output for this connector.
Menu option
Input
Display sync
Sync 1
Sync 3
2D Sync 3
Main menu — Installation — Synchronization — [2D] Sync 3
This menu option is used to select which signal the Sync 1 connector shall send out.
When a Sync in connector (Sync 1,2,3) is used for source or display synchronization it will automatically be
configured as 'input' and it will not be possible to select any type of output for this connector.
Menu option
Input
Display sync
Sync 1
Sync 2
601–0307–00 F50 25/02/2016
Description
Use the order of the input frames from the source itself.
Use the signal on the selected sync-in to determine the order of the input frames.
Description
Used as sync signal to determine the order of input frames.
Sends the sync signal from the display sync source.
Sends the sync signal from the sync 2 connector.
Sends the sync signal from the sync 2 connector.
Description
Used as sync signal to determine the order of input frames.
Sends the sync signal from the display sync source.
Sends the sync signal from the sync 1 connector.
Sends the sync signal from the sync 3 connector.
Description
Used as sync signal to determine the order of input frames.
Sends the sync signal from the display sync source.
Sends the sync signal from the sync 1 connector.
Sends the sync signal from the sync 2 connector.
11. Multichannel installations
99