Barco F50 User Manual page 105

When a Sync in connector (Sync 1,2,3) is used for source or display synchronization it will automatically be
configured as 'input' and it will not be possible to select any type of output for this connector.
Setting Description
Input Used as sync signal to determine the order of input frames.
Display Sends the sync signal from the 3D display sync source.
sync
Glass Sends a signal that is used to synchronize the shutter glasses. Connect this signal to the IR or RF emitter.
sync
Sync 1 Sends the sync signal from the sync 1 connector.
Sync 3 Sends the sync signal from the sync 3 connector.
3D Sync 3
Main menu — Installation — Synchronization — [3D] Sync 3
This menu option is used to select which signal the Sync 1 connector shall send out.
When a Sync in connector (Sync 1,2,3) is used for source or display synchronization it will automatically be
configured as 'input' and it will not be possible to select any type of output for this connector.
Description
Setting
Input Used as sync signal to determine the order of input frames.
Display Sends the sync signal from the 3D display sync source.
sync
Glass Sends a signal that is used to synchronize the shutter glasses. Connect this signal to the IR or RF emitter.
sync
Sync 1 Sends the sync signal from the sync 1 connector.
Sync 2 Sends the sync signal from the sync 2 connector.
601–0307–00 F50 25/02/2016
11. Multichannel installations
101