Cleaning The Lens; The Lens Lock Handle Is Located On The Front Side Of The Projector, Slide This Handle To The Right - Barco SIM 5W User Manual

4. Installation
How to remove the Lens?
1. Support the lens with one hand.

2. The lens lock handle is located on the front side of the projector, slide this handle to the right.

Image 4-7
The lens lock handle is located on the front side of the projector, slide this handle to the right.
3. Remove the lens out of its housing.
4. Slide the lens lock handle back to the left.
4.3

Cleaning the lens

Necessary tools
Toraysee
TM
How to clean the lens ?
1. Always wipe lenses with a CLEAN Toraysee
2. Wipe lenses in a one single direction.
Warning:
3. Do not leave the cleaning cloth in either an open room or lab coat pocket, as doing so can contaminate the cloth.
4. If smears occur when cleaning lenses, replace the cloth. Smears are the first indication of a dirty cloth.
20
Downloaded From projector-manual.com Barco Manuals
To minimize the possibility of damage to optical coatings, or scratches to lens surfaces, we have developed
recommendations for cleaning. FIRST, we recommend you try to remove any material from the lens by blowing
it off with clean, dry deionized air. DO NOT use any liquid to clean the lenses.
cloth (delivered together with the lens kit). Order number : R379058.
Do not wipe back and forwards across the lens surface as this tends to grind dirt into the coating.
C :
AUTION Do not use fabric softener when washing the cleaning cloth or softener sheets when drying the
cloth.
Do not use liquid cleaners on the cloth as doing so will contaminate the cloth.
Other lenses can also be cleaned safely with this Toraysee
TM cloth.
TM
cloth.
R59770324 SIM 5W 22/12/2011