7.4
Review and change network settings
General
The projector uses Dynamic Host Configuration Protocol (DHCP) to enable better identification and control of the projector when
connected to the Local Area Network (LAN).
DHCP is enabled by default. It can be disabled from Main Menu — Settings — Network — Change LAN settings
When DHCP is enabled, current network settings are automatically displayed at Main Menu — Settings — Network.
When DHCP is disabled, users can set a fixed IP address for the projector at Main Menu — Settings — Network — Change LAN
settings.
601–0307–00 F50 25/02/2016
7. Change projector settings
67