Asynchronous Side By Side - Barco F50 User Manual

12. Stereoscopic multichannel setup

12.7 Asynchronous side by side

About
In asynchronous side-by-side 3D (single and dual head), the projector utilizes the SYNC connectors to distribute a system wide
display sync. This display sync is used by all projectors to perform frame rate conversion on the input signals if necessary. An extra
cable is connected between a SYNC connector on projector 1 and a SYNC connector on projector 2, as illustrated in image 12-5 .
IR
Image 12-5
In this setup the projectors need the following settings to send/utilize the display sync correctly:
Setting
3D
3D Dual head source 1
3D Dual head source 2
3D L/R sync
3D display sync
Sync 1
Sync 2
Sync 3
112
DP1
DP2
IG
Projector 1
Dual Head stereo
DP 1
DP 2
N/A
Source
Display sync
N/A
Glass sync
BNC
DP1
IG
Projector 2
Dual Head stereo
DP 1
DP 2
N/A
Sync 1
Input
Sync 1
N/A
DP2
601–0307–00 F50 25/02/2016