Set Up The Picture - Barco F50 User Manual

8. SET UP THE PICTURE

About
This chapter describes how to set up and adjust the picture display in order to get the best possible image on screen.
For best results, picture adjustments should be carried out whenever the source, signal type and/or format is changed. General set-
tings out of the box are standardized to meet accepted industry standard signal levels. Signal levels deviating from these standards
will need proper calibration before the output matches the desired result.
Wherever possible, we recommend you use customized test images during picture adjustments.
In general, the following order is recommended when adjusting the picture display:
1. Contrast
2. Gamma
3. Brightness
4. Saturation
Overview
• Select the image orientation
• Use test images
• Set up Picture-by-Picture
• Apply a display profile
• Adjust lamp power
• Use gamma curves
• Adjust brightness, saturation and contrast
• Choose an aspect ratio
601–0307–00 F50 25/02/2016
8. Set up the picture
71