Color Calibration Best Practice - Barco F50 User Manual

10.5 Color calibration best practice

General
Best practice is to perform the calibration in the same environment as the projector will be used. If this is not possible due to the
nature of the installation, calibration should be performed in a controlled light environment (dark room). Too much ambient light
falling onto the screen can make it impossible to get exact results.
It is important to do all measurements from the same place in the room, at the same place on the screen. Use a tripod for the chroma
meter if possible. The test images should fill the screen and be measured one at a time.
Always calibrate using test images from the same source that is to be used with the projector in the installation.
601–0307–00 F50 25/02/2016
10. Color calibration
93