Status Indicator Light - Barco F50 User Manual

6.2

Status indicator light

General
The status indicator light on the projector keypad (reference 7, image 6-1) shows the current status of the projector, and can be used
to troubleshoot operating issues.
Indicator
Blue (steady)
Blue flashing (1 flash per
second / 60FPM)
Yellow (steady)
Yellow heartbeat (1 flash per
6 seconds/ 10 FPM)
Yellow flashing (1 flash per
second / 60FPM)
Yellow pulsing (3 flashes per
second / 180FPM)
Red (steady)
Flashing red (1 flash per
second / 60FPM)
Pulsing red (3 flashes per
second / 180FPM)
Turn the status indicator light ON/OFF
Main Menu — Settings — LED Indicators Mute
During normal operations, the status indicator will glow to indicate the current status of the projector. The indicator light can be
turned off (muted) to eliminate light pollution in totally dark installations.
Critical error indications (red status indicator) will still display when the LED Indicator is muted.
601–0307–00 F50 25/02/2016
Description
Normal operation
Booting up
Standby (off)
ECO standby
Wait
Firmware upgrade package
verified
Lamp life expired
System error
Internal temperature
6. Input and communication
Action required
None
Wait for an image to appear
Press the power button to bring the projector out of standby
or sleep mode
Press the power button to bring the projector out of standby
or sleep mode
None
Wait for flash procedure to complete
Replace the affected lamp module as soon as possible
Upgrade/replace the projector system firmware
The projector will automatically go to standby mode, and
attempt to cool down internal parts. Do NOT remove mains
power supply.
Verify that room's environmental conditions meet
requirements. See "Installation conditions", page 31.
Check that the projector exhaust system is unobstructed and
working correctly.
Contact the service technician.
47