5. Installation
Motorized lens shift
TheF50 lens shift function is fully motorized and can be controlled via the projector keypad, wireless remote control, or wired control
interface e.g. RS232.
To activate lens shift, press the OK button on the keypad, or the Shift button on the remote control. Use the corresponding arrows
to move the lens up, down, right and left. For more detail on this procedure, see "Lens shift", page 26.
For information on using the RS-232 or LAN control interfaces, please refer to the relevant ASCII Commands Protocol available for
download at www.barco.com
601–0307–00 F50 25/02/2016
41