4. Lenses
4.3
Lens shift
General
This section describes how to shift the lens using the projector keypad and the remote control.
For information on the available shift and offset values for each lens, see"Lens shift and offset matrix", page 40.
All F50 lenses have limited downwards shift.
Lens shift can also be carried out via the RS232 communication interface. See the relevant ASCII Commands Protocol for more
details.
Shift the lens using the keypad
1. Press 'OK' to activate lens shift
2. Use the arrow keys to move the lens up, down, left, and right.
Shift the lens using the remote control
1. Press the shift button (
2. Use the navigation arrows to move the lens up, down, left and right.
26
) to activate lens shift.
SHIFT
601–0307–00 F50 25/02/2016