Input Slots - Barco R9001338 Owner's Manual

Input Slots

Highlight Input Slots by pushing the control disk up or down and press
ENTER .
The internal system will scan the input slots and displays the result
in the Input Slots menu.
Source indication
Video or S-Video Video[Video]
Video[S-Video]
RGB analog RGB-SS[CV] : separate sync is composite
video signal on H/C input
RGB-SS[CS or HS&VS] : separate sync is
composite sync or horizontal and vertical
sync
RGB-SOG : sync on green
Component video Component Video - SS : component video
with separate sync
Component Video - SOY : component video
with sync on Y
Component Video - 3LSS : component video
with 3 level separete sync.
Component Video - 3LSOY : component
video with 3 level sync on Y.
RGB analog with
tri-level sync RGB3L-SS : RGB with separate Tri level
sync
RGB3L-SOG : RGB with Tri level sync on
green
5975288A BARCOGRAPHICS 8200LC 150597
CONFIGURATION
INTERNAL PATTERNS
Select with
If a RCVDS (switched on) or VS05 is connected to the projector, it will
be also indicated on the menu by adding +800 peripheral . If no 800
peripheral indication is made on the menu, there are still two possi-
bilities :
- no RCVDS or VS05 connected or
- RCVDS is switched off.
When a 800 peripheral is connected to the projector, the input slots
are not accessible with the control disk to toggle their function.
Installation
INSTALLATION
INPUT SLOTS
CONVERGENCE
or
then <ENTER>
<EXIT> to return.
INPUT SLOTS
Select with or
then <ENTER>
<EXIT> to return.
1. RGB-SS [CV]
2. RGB-SOG
3. Video [Video]
4. Component Video
12-3