Rename - Barco R9001338 Owner's Manual

Rename

To change the name of a selected file.
Use the control disk to select RENAME and press ENTER . The
Rename selection menu will be displayed.
Use the control disk to select a file name and press ENTER to select.
The Rename menu will be displayed with the selected file name
already filled in in the 'From file name :' area and in the 'To file name:'
area.
Press ENTER to select the separate characters. Push the control disk
to the right or to the left to select the desired character. Change that
characters by pushing the control disk up or down. Numeric charac-
ters can be entered directly with numeric keys on the RCU.
Press ENTER to confirm. The renamed file is entered in the list of files.
Press EXIT to return to the Rename menu selection. No changes are
made.
5975288A BARCOGRAPHICS 8200LC 150597
Random Access Adjustment Mode
FILE SERVICE
LOAD
EDIT
RENAME
COPY
DELETE
OPTIONS
Select with or
then <ENTER>
<EXIT> to return.
RENAME FILE
Filename Src
-----------------------------------------------------
ntsc .s01 1 675x240i
ntsc .c01 1 675x240i
ntsc .s03 3 675x240i
-----------------------------------------------------
Active file : ntsc.c50
Select with or
<ENTER> to accept
<EXIT> to return.
RENAME FILE
Frome file name :
ntsc.s01
To file name :
demo.s10
Select with or
Reprogram with
or numeric keys
<ENTER> to confirm
<EXIT> to return
Resolution
or
11-9