Preset Input Balance - Barco R9001338 Owner's Manual

Service Mode

Preset Input Balance

Highlight White Balance by pushing the control disk up or down and
press ENTER to select.
With the white balance adjustment, the gain of the red and blue
channels can be adjusted in comparison with the green channel. (To
adjust the gain of the complete video signal, use the contrast
adjustment)
Use the control disk by pushing up or down to change Red or by
pushing to the right or to the left to change Blue.
Press EXIT to return to the Preset Input Balance menu.
13-14
SERVICE
PANEL ADJUSTMENTS
PRESET INPUT BALANCE
60Hz TRACKING
I2C DIAGNOSIS
MORE...
Select with or
then <ENTER>
<EXIT> to return. PRESET INPUT BALANCE
WHITE BALANCE
Select with <ENTER>
<EXIT> to return
Adjust
red with or
blue with or
5975288A BARCOGRAPHICS 8200LC 150597