How To Install A Projection Lens - Barco R9001338 Owner's Manual

Installation Guidelines

* How to install a projection lens?

The BARCOGRAPHICS 8200LC is supplied without any lens.
The following lenses are available as an option :
HD(0.9:1) (only for on-axis)
HD(1.2:1)
HD(2.2:1)
HD(3.3:1)
HD(4.0:1)
HD(5:1)
HD(7:1)
HD(1.5-3:1)
HD(3.0-5.3:1)
WHD(3.5:1)
How to install the lens by the BARCOGRAPHICS 8200LC?
Remove the foam rubber in the opening of the lens holder.
- Take the new lens out of its shipping carton and remove the lens
covers.
- Turn the lens into the lens holder by turning clockwise.
- Focus the lens (see appendix C) and secure the correct position
with the fastener ring by turning this ring clockwise.
* How to install the projector?
Ceiling mount or table mount?
To install the BARCOGRAPHICS 8200LC, it is recommended using
the BARCO mounting kits which are specially designed for this
function.
3-6
BARCO ceiling support.
Order number : R9827341
Always use the BARCO ceiling support to attach your
BARCOGRAPHICS 8200LC to the ceiling.
The installation instruction for this support is enclosed in the packet
of the set. You can order these instructions also from BARCO.
(BARCO order number R5975693)
Note : A ceiling mount adapter is needed to mount the projector to the
ceiling mount support. BARCO order number : R9829100.
(see appendix A for detailled information)
BARCO projection table.
BARCO's projection table provides adjustable height and offers a
stable surface for the projector
Order number R9827740.
5975288A BARCOGRAPHICS 8200LC 150597