Copy - Barco R9001338 Owner's Manual

Random Access Adjustment Mode

Copy

To copy a selected file into a new file.
Use the control disk to select COPY and press ENTER . The Copy
selection menu will be displayed.
Use the control disk to select a file name and press ENTER to select.
The Copy menu will be displayed with the selected file name already
filled in in the 'From file name :' area and in the 'To file name :' area.
Press ENTER to select the separate characters. Push the control disk
to the right or to the left to select the desired character. Change that
characters by pushing the control disk up or down. Numeric charac-
ters can be entered directly with numeric keys on the RCU.
Press ENTER to confirm. The copied file is entered in the list of files.
Press EXIT to return to the Copy selection menu. No copies are
made.
11-10
FILE SERVICE
LOAD
EDIT
RENAME
COPY
DELETE
OPTIONS
Select with or
then <ENTER>
<EXIT> to return.
COPY FILE
Filename Src Resolution
-----------------------------------------------------
ntsc .s01 1 675x240i
ntsc .c01 1 675x240i
ntsc .s03 3 675x240i
-----------------------------------------------------
Active file : ntsc.c50
Select with or
<ENTER> to accept
<EXIT> to return.
COPY FILE
Frome file name :
xga_60.s03
To file name :
xga_60.c14
Select with or
Reprogram with or
or numeric keys
<ENTER> to confirm
<EXIT> to return
5975288A BARCOGRAPHICS 8200LC 150597