Barco R9001338 Owner's Manual page 52

Connections
Push the control disk up or down to select Installation and press
ENTER .
Use the control disk to select Input Slots by pushing up or down and
press ENTER . The internal system will scan the inputs and displays
the result in the Input Slots menu.
Push the control disk up or down to select the corresponding RGB
input slot. To change the sync priority for Sync separate, press
ENTER key to toggle between CV and CS or HS&VS.
Possible indication :
RGB-SS [CV] = separate sync is composite video signal
on H/C input.
RGB-SS [CS or HS&VS] = separate sync is composite
sync or horizontal and vertical sync.
RGB-SOG = sync on green.
7-8
ADJUSTMENT MODE
Select a path from below :
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
Source 01
Select with or
INSTALLATION
then <ENTER>
<EXIT> to return.
INPUT SLOTS
CONVERGENCE
CONFIGURATION
INTERNAL PATTERNS
INPUT SLOTS
Select with or
then <ENTER>
<EXIT> to return.
1. RGB-SS [CV]
2. RGB-SOG
3. Video [Video]
4. Component Video
5975288A BARCOGRAPHICS 8200LC 150597