Identification - Barco R9001338 Owner's Manual

Identification

To display the Identification sreen, push the control disk up or down to highlight
Identification and press ENTER to display the Identification screen.
The Identification screen gives an overview of :
- Type of projector
- Projector address
- Software version
- Installation configuration
- Baud rate
- Text ON
- Projector serial number
- Projector run time
- Type of projector : BARCOGRAPHICS 8200LC
- Software version
- Proj. Address : to change the address of the projector, see Change Projector Address
in this chapter.
- Installation : possible installations :
* Front/Ceiling
* Front/Table
* Rear/Ceiling
* Rear/Table
To change the installation configuration follow the instructions in chapter Installation Set
Up.
5975288A BARCOGRAPHICS 8200LC 150597
Service Mode
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTINE HISTORY
MORE...
Select with or
then <ENTER>
<EXIT> to return.
1 3 - 5