Installation
Blue on green convergence.
Use the control disk to highlight Blue on green and press ENTER to
display the Blue on green test pattern.
Repeat the same procedure as for Red on green lines but read blue
when red is indicated.
To check the result of the convergence adjustments, highlight Hatch
and press ENTER . A hatch pattern will be displayed on the screen.
ENTER : displays a hatch pattern.
EXIT : returns to the installation menu.
All lines must be displayed in white, if not so repeat the convergence
adjustment procedure.
12-8
CONVERGENCE
GREEN
BLUE ON GREEN
RED ON GREEN
HATCH
Select with
or
then <ENTER>
<EXIT> to return.
CONVERGENCE
GREEN
BLUE ON GREEN
RED ON GREEN
HATCH
Select with
or
then <ENTER>
<EXIT> to return.
5975288A BARCOGRAPHICS 8200LC 150597