Magik Interface; Adapter And Communication Cables - Barco R9001338 Owner's Manual

Optional Equipment

MAGIK Interface

Multifuctional Analog Graphics Interface Kit.
BARCO's MAGIK interface allows the user to connect a presentation
device such as a projector or a professional monitor to any computer
with analog video signal with or without maintaining the connection
with its own display. The MAGIK interface buffers and amplifies any
RGB analog signal with TTL or analog sync without signal loss or
image degradation.
The MAGIK can be delivered together with connection cables for PC,
MAC, SUN or workstation in a nice handbag case.
Order numbers MAGIK with cables and case :
R9828120 (230V)
R9828129 (120V)
Order number MAGIK only :
R9828121 (230V)
R9828128 (120V)

Adapter and communication cables

BARCO provides several cables to connect peripheral equipment to
the BARCOGRAPHICS 8200LC.
a. D9-D9 communication cable
- To connect an IBM PC (or compatible) to the projector.(only if the
optional RS232 port is installed.)
- To connect a RCVDS 05 to the BARCOGRAPHICS 8200LC.
- To connect a IR receiver to the RCVDS or to the BARCOGRAPHICS
8200LC.
- To be used as extension cable for all other adapter cables.
Available length :5 m (16ft), order number R982770; 15 m(50ft), order
1 4 - 4
5975288A BARCOGRAPHICS 8200LC 150597