9. INSTALLATION MODE
Overview
•
Start up of the Installation mode
•
Input Slots
•
800 peripheral
•
Source Switching
•
No Signal
•
Convergence
•
Configuration
•
Lens Adjustment
•
Quick Access Keys
•
OSD
•
Internal Patterns
9.1 Start up of the Installation mode
Start up
1. Push the cursor key ↑ or ↓ to highlight Installation. (menu 9-1)
2. Press ENTER.
The Installation mode menu will be displayed. (menu 9-2)
ADJUSTMENT MODE
Select a path from below :
RANDOM ACCESS
INSTALLATION
SERVICE
Select with ↑ or ↓
then <ENTER>
<EXIT> to return.
Menu 9-1
9.2 Input Slots
What can be done ?
The input configuration of the variable inputs is shown in the Input slots menu.
To view or the change the input configuration.
1. Push the cursor key ↑ or ↓ to highlight Input Slots. (menu 9-3)
2. Press ENTER to select.
The input slots menu will be displayed. (menu 9-4)
INSTALLATION
INPUT SLOTS
800 PERIPHERAL
SOURCE SWITCHING
NO SIGNAL
CONVERGENCE
CONFIGURATION
LENS
QUICK ACCESS KEYS
OSD
INTERNAL PATTERNS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return.
Menu 9-3
R5976445 BARCO GALAXY 15042003
INSTALLATION
INPUT SLOTS
800 PERIPHERAL
SOURCE SWITCHING
NO SIGNAL
CONVERGENCE
CONFIGURATION
LENS
QUICK ACCESS KEYS
OSD
INTERNAL PATTERNS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return.
Menu 9-2
INPUT SLOTS
1. RGB-SS [CV or HS & VS]
2. RGB-SS [CV or HS & VS]
3. No module
4. No module
______________
1. DVI OUTPUT [Active Image]
Select with ↑ or ↓
then <ENTER>
<EXIT> to return.
Menu 9-4
9. Installation Mode
63