Starting Up The Service Mode - Barco R9001338 Owner's Manual

Service Mode

Starting up the Service Mode

Push the control disk up or down to highlight Service and then press
ENTER .
Some items in the Service mode are password protected (when the
password function is active). Enter your password to continue. All
other password protected items are now available if you stay in the
adjustment mode.
The service menu is built-up in two parts which are connected
together with the 'more' item.
If the disered item is not in the list of the displayed menu, select more
with the control disk and push ENTER to display the other items in the
service menu.
ENTER continues to the Service mode selection menu.
EXIT returns to operational mode.
1 3 - 2
ADJUSTMENT MODE
Select a path from below :
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
Source 01
Select with or SERVICE
then <ENTER>
IDENTIFICATION
<EXIT> to return.
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTINE HISTORY
MORE...
Select with or
then <ENTER>
<EXIT> to return.
SERVICE
PANEL ADJUSTMENTS
PRESET INPUT BALANCE
60Hz TRACKING
I2C DIAGNOSIS
MORE...
Select with or
then <ENTER>
<EXIT> to return.
5975288A BARCOGRAPHICS 8200LC 150597