Barco R9001338 Owner's Manual page 51

RGB input selection :
Key in the corresponding slot number on the RCU or the local
keypad.
Straps on module level :
Floating or non-floating input.
Red : J3 : strap "yes" : non floating
Green : J4 : strap "yes" : non floating
Blue : J5 : strap "yes" : non floating
H/C : J6 : strap "yes" : non floating
V : J7 : strap "yes" : non floating
Factory preset : strap "yes", non floating input
Sync selection : strap on module level.
J8 : see drawing
Factory preset : separate sync.
Sync selection on the Input Slots menu.
The horizontal sync input can be set as separate sync input or as
separate sync + video input. To change this setting, press ADJUST
or ENTER key to start up the Adjustment mode..
5975288A BARCOGRAPHICS 8200LC 150597
strap "no" : floating
strap "no" : floating
strap "no" : floating
strap "no" : floating
strap "no" : floating
J8
Sync selection
Separate sync
J5
J4
J6
J3
Non-Floating
Floating
Floating or non floating input
Connections
Sync on green
J7
7-7