Barco R9001338 Owner's Manual page 67

Start Up of the Adjustment Mode
Some items in the Adjustment mode are password protected. While selecting such an
item, the projector asks to enter your password (Password protection is only available
when the password strap on the controller module is ON, see 'Change password' in
chapter 'Service mode'.
Your password contains 4 digits.
Enter the digits with the numeric keys.
Example : 2 3 1 9
The first digit position is highlighted. Enter with the numeric keys. The highlighted PASSWORD
square jumps to the next position. Continue until all 4 digits are filled in.
ENTER PASSWORD
----
Use numeric keys
<EXIT> to return
When your password is correct, you get access to the selected item.
When your password is wrong. The error message "Invalid password" is displayed on
the screen. Press ENTER to continue and to return to the Service menu.
Error
Factory programmed password : 0 0 0 0
Invalid password
Once the password is correctly entered, all other password protected items are
accessible without re-entering your password. <EXIT> to return
When re-entering the Adjustment mode, it will be nessary to enter your password again
when selecting a password protected item.
9-3
5975288 BARCOGRAPHICS 8200 110497