Starting Up The Installation Mode - Barco R9001338 Owner's Manual

Installation

Starting up the Installation Mode

Push the control disk up or down to highlight Installation and then
press ENTER .
ENTER continues to the Installation mode selection menu.
EXIT returns to operational mode.
The following item can be selected in the Installation mode :
Input slots : to set up the input priority.
Convergence : to align the red, green and blue image.
Configuration : to set up the projector position.
Internal Patterns
12-2
ADJUSTMENT MODE
Select a path from below :
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
Source 01
Select with or
then <ENTER>
<EXIT> to return.
INSTALLATION
INPUT SLOTS
CONVERGENCE
CONFIGURATION
INTERNAL PATTERNS
Select with or
then <ENTER>
<EXIT> to return.
5975288A BARCOGRAPHICS 8200LC 150597