Installation Mode; Starting Up The Installation Mode; Input Slots - Barco R9001140 Owner's Manual

Table of Contents

Advertisement

10

INSTALLATION MODE

Starting up the Installation Mode

Push the control stick forward or backward to highlight Installation
and then press ENTER .
ENTER continues to the Installation mode selection menu.
EXIT returns to operational mode.
The following item can be selected in the Installation mode :
Input slots : to set up the input priority.
Convergence : to align the red, green and blue image.
Configuration : to set up the projector position.
Internal Patterns

Input Slots

Highlight Input Slots by pushing the control stick forward or backward
and press ENTER.
The internal system will scan the input slots and displays the result
in the Input Slots menu.
Source
indication
Video or S-Video
Video[Video]
Video[S-Video]
RGB analog
RGB-SS[CV] : separate sync is composite
video signal on H/C input
RGB-SS[CS or HS&VS] : separate sync is
composite sync or horizontal and vertical
sync
RGB-SOG : sync on green
Component video
Component Video - SS : component video
with separate sync
Component Video - SOY : component video
with sync on Y
Component Video - 3LSS : component video
with 3 level separete sync.
Component Video - 3LSOY : component
video with 3 level sync on Y.
RGB analog with
tri-level sync
RGB3L-SS : RGB with separate Tri level
sync
RGB3L-SOG : RGB with Tri level sync on
green
If a RCVDS (switched on) or VS05 is connected to the projector, it will
be also indicated on the menu by adding +800 peripheral. If no 800
peripheral indication is made on the menu, there are still two possi-
bilities :
- no RCVDS or VS05 connected or
- RCVDS is switched off.
When a 800 peripheral is connected to the projector, the input slots
are not accessible with the control stick to toggle their function.
5975207 BARCOGRAPHICS 9100 081196
Installation Mode
ADJUSTMENT MODE
Select a path from below :
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
Source 01
Select with
or
then <ENTER>
<EXIT> to return.
INSTALLATION
INPUT SLOTS
CONVERGENCE
CONFIGURATION
INTERNAL PATTERNS
Select with
or
then <ENTER>
<EXIT> to return.
INSTALLATION
INPUT SLOTS
CONVERGENCE
CONFIGURATION
INTERNAL PATTERNS
Select with
or
then <ENTER>
<EXIT> to return.
INPUT SLOTS
Select with
or
then <ENTER>
<EXIT> to return.
1. RGB-SS [CV]
2. RGB-SOG
3. Video [Video]
4. Component Video
10-1

Advertisement

Table of Contents
loading

Table of Contents