Connecting To The Virtual Servers - LevelOne WBR-3407 User Manual

WBR-3407 User Guide
Data - Virtual Servers Screen
Servers
Servers
Properties
Enable
PC (Server)

Connecting to the Virtual Servers

Once configured, anyone on the Internet can connect to your Virtual Servers. They must use
the Internet IP Address (the IP Address allocated to you by your ISP).
e.g.
http://203.70.212.52
ftp://203.70.212.52
It is more convenient if you are using a Fixed IP Address from your ISP, rather than Dynamic.
However, you can use the Dynamic DNS feature to allow users to connect to your Virtual
Servers using a URL, rather than an IP Address.
Figure 66: Virtual Servers Screen
This lists a number of common Server types. If the desired Server
type is not listed, you can create a Firewall Rule to achieve the
same effect as the Virtual Server function.
Use this to Enable or Disable support for this Server, as required.
If Enabled, you must select the PC to which this traffic will be sent.
Select the PC for this Server. The PC must be running the
appropriate Server software.
For each entry, the PC must be running the
appropriate Server software.
If the desired Server type is not listed, you can define
your own Servers, using the Firewall Rules.
From the Internet, ALL Virtual Servers have
the IP Address allocated by your ISP
72