Table of Contents
Advertisement
Connecting to the Virtual Servers
Once configured, anyone on the Internet can connect to your Virtual
Servers. They must enter the IP Address shown in the IP Address on
the WAN Port screen as the destination.
e.g.
http://203.70.212.52
Using this Device as a Virtual Web Server
It is possible to configure the LevelOne Broadband Router itself as a
Virtual Web Server. Once this is done, you can configure this device
through the Internet.
For the remote PC, the destination IP Address is the IP Address
shown on the WAN Port screen.
Upon connecting to the LevelOne Broadband Router, you will be
prompted for the device password.
To make the LevelOne Broadband Router a Virtual Web Server :
•
Enable Virtual Server on the Advanced Internet screen
•
Enable Web Server on the Virtual Servers screen.
•
Enter the Device IP Address (from the Internal LAN Port screen)
as the IP Address of the Web Server.
Ensure that a password has been set!
Advanced Internet
61
Advertisement
Table of Contents
