Software Configuration; Getting Start - LevelOne WHG-1000 User Manual

3.2

Software Configuration

3.2.1

Getting Start

Step :
1. Once the hardware installation is done, set DHCP in TCP/IP of the administrator's PC to get an IP address
automatically. Connect the PC to the LAN(PoE) port of WHG-1000. An IP address will be assigned to the
PC automatically via the WHG-1000.
2. Launch a web browser to access the web GUI of WHG-1000 by entering "http://192.168.2.254" in the
address field.
3. The following Administrator Login Page will appear. Enter "root" in the Username field, and "default" in the
Password field. Click OK button to login.
If you can't get the login screen, you may have incorrectly set your PC to obtain an IP address
automatically from LAN port or the IP address used does not have the same subnet as the URL.
Please use default IP address such as 192.168.2.xx in your network and then try it again.
WHG-1000 300Mbps Wireless PoE Hotspot Gateway
15
User's Manual