Clutch Removal - Honda CRF110F Service Manual

CLUTCH
REMOVAL
NOTE :
• Clutch system can
be
serviced with the engine
installed on the frame.
Remove the following:
- Righi crankcase cover (page 10-5)
- Engine oil centrifugal filter cover (page 3-11)
Bend up the tab [1) of the lock washer 10 clear the lock
nut (2] groove.
Install the special tool using proper bolts or screws.
TOOL :
[1] Clutch center holder 07HMB·HB70100
or
07923·HB3000B
(U.S.A. only)
Remove the centrifugal clutch lock nut [2J using the
special tools.
TOOLS :
[3] lock nut wrench , 20 x 24 mm 07716'{)020100
[4] Extension bar 07716-0020500
or equivalent commercially avai lable In U.S.A.
Remove the washer [1J and lock washer [2].
Remove the clutch weight assembly (1).
CLUTCH/GEARSHIFT LINKAGE
10-9