Brake Pedal Assembly/Installation - Honda CRF110F Service Manual

REAR WHEEUBRAKE/SUSPENSION
15-14
Remove the cotter pin [1] and washer [2].
Release the relurn spring [3J end from the cut oul of the
frame.
Remove the brake pedal (4) and return spring.
Remove the cotter pin [1] and joint pin [2}. Ihen
separate the brake rod (3) and brake pedal [4].
ASSEMBLY/INSTALLATION
141
Set the brake rod [1] and brake pedal [2J, instal! the joint
,---=----:-::----- - - - - - - - - - ,
pin
[31
and new cotter pin [4] .
$~
[4]
....
Apply
grease to Ihe brake pedal pivot sliding surface.
Install Ihe relum spring [1] and brake pedal [2J to the
pivot.
Hook the return spring end to Ihe cut out of the frame.
Inslallthe washer {3] and new cotter pin [4).
121