Honda CRF110F Service Manual page 227

FRONT WHEEUBRAKE/SUSPENSION/STEERING
Hold the fork slider in a vise wi th soft jaws or a shop
towel.
Apply a locking agent to the fork socket boll [1 J threads.
Install the socket boll with a new sealing washer (2] into
the fork piston.
If
the fori( piston
Tighten the socket boll [1 J to the specified torque.
turns logether with
the socket bolt, TORQUE:20 N'm (2.0 kgf'm, 151bHt)
temporarily install
the
fori(
spring,
spring seat, collar
end fori( cap bolt.
Wrap vinyl tape around the fork top end to avoid
damaging the fork oil seal lips.
Coal a new fork oil seal [1] lips with fork fluid and install
it over the fork pipe with the marking side facing up.
Drive the fork oil seal into the fork slider using the
speciatlools.
TOOLS :
[2J Fork seal driver weight
[31 Fork seal driver aUachment,
31 mm
U.S.A. TOOLS :
Driver weight
Fork seal driver attachment,
31 mm
07747-0010100
07747-0010400
07947 -KA501 00
07AMD-GFMA100
131
Install the oil seal stopper ring 11] into the fork slider ,----,,...
groov6 securely.
Apply fork fluid to a new dust seal [2] lips and install itto
the fork slider.
Remove the vinyl tape from the fork pipe end.
111
Ams:I
~a 121
14-23