Air Cleaner; Crankcase Breather - Honda CRF110F Service Manual

Table of Contents

Advertisement

AIR CLEANER
Remove the left
fuel tank
shroud
(page
2-3).
Remove
the
four screws [1J and air cleaner housing
cover
12].
Remove the air cleaner element [3J from the housing.
Pour clean Pro
Honda Foam
Filter Oil or equivalent
(Canada:
Honda Foam Filter
Oil or equivalent) over
the
entire surface of the
air
cleaner.
Use both hands to evenly spread the oil
into
the air
cleaner.
Gently squeeze out any excess oil
(To
keep your
hands
dry, place the air cleaner in a clean plastiC
bag
before
spleading the
oil
into
the
air cleaner).
Clean the inside of
Ihe air
cleaner housing.
Installation is in the reverse order of removal.
When installing
the
air cleaner element, apply
grease to the element all
around.
TORQUE:
Air
cleaner
housing cover
screw:
1.5
N'm (0. 15
kgf'm
,
1.1IbHt)
CRANKCASE BREATHER
NOTE:
Service more frequently when ridden in rain
,
at full
throttle,
or after the motorcycle is
washed.
Service if the
deposit level can
be
seen in
the drain
cap.
Check the crankcase breather drain cap
(1].
If deposits
has
collected, remove the clip [2] and
crankcase breather drain cap.
Drain depoSits into
the
suitable container.
Install
the
crankcase breather drain cap and clip.
MAINTENANCE
12J
I1J
Check the crankcase breather hose (1) for deterioration,
;::==~~:::~~=~'::i~::::::~~~~
damage or
leakage.
3-7

Advertisement

Table of Contents
loading

Table of Contents