Honda CRF110F Service Manual page 221

FRONT WHEEUBRAKE/SUSPENSION/STEERING
InslaUthe brake arm [1J by aligning the punch marks of
the arm and brake cam.
Apply a locking agent to the brake arm pinch bolt [2J
threads.
Install the brake arm pinch bolt and brake arm nut (3).
Tighten the bolt to the specified torque.
TORQUE: 9.9 N'm (1.01 kgf'm, 7.3Ibf-ft)
Align
L1mJ
[2[
Apply 0.1 - 02 9 of grease to the brake cam brake shoe
~==[ = 2 1====~~::::::::.1II~=~
contact area and anchor pin.
...~
Assemble the brake shoes [1] and springs [2) in the
direction as shown.
InslaUthe shoe assembly onto Ihe brake panel.
Wipe any excess grease from the brake cam and
anchor pin.
INSTALLATION
Set the spring (1] to the brake cable
[21.
Connect the brake cable to the brake arm [31 and brake
panel.
Connect the brake cable 11) to the front brake lever [2).
Insi a)) the front wheel (page 14-13 ).
Adjust the f ront brake lever freeplay (page 3-15).
14-17