Honda CRF110F Service Manual page 196

CRANKSHAFTITRANSMISSION/KICKSTARTER
Apply molybdenum oil solution to the starter pinion gear
[1]
inner surface.
Make
sure thaI
the
Install the starter pinion gear, washer [2] and snap ring
snap ring
is
firmly
[3}.
seated in the
groove.
Inslall the ratchet spring [1]10 the starter ratchet [2] .
Make sure that the
Install the starter ratchet and snap ring [3] to the
snap
ring is
firmly
kicksiarter spindle.
seated in the
groove.
[3)
[2)
[2)
[3)
Install the return spring [1] to the kickstarter spindle
~===========:~;;:;;;:;;;:;~;::;
12-22
while aligning the spring end with the hole on the
spindle.
Install the collar [1] to the kickstarter spindle while
~~lIIIIIiIIIIII""",=============:::;
aligning jls groove with the return spring end .