Fork Spring Inspection; Fork Pipe/Fork Slider/Piston Inspection; Fork Pipe Bushing/Back-Up Ring - Honda CRF110F Service Manual

Do
nor remove the
fork piston ring
except
to
replace it
with
8
new one.
-
FRONT WHEEUBRAKE/SUSPENSION/STEERING
INSPECTION
Fork spring
Measure the fork spring free length.
SERVICE LIMIT: 272 mm (10.71 in)
Fork pfpelfork sUderfpiston
Check the fork pipe [ll and fork slider [2J for score
marks and excessive or abnormal wear.
Replace the components
if
necessary.
Place the fork pipe in V-blocks and measure the runout.
Actual runoul is 1/2 the total indicator reading.
SERVICE LIMIT: 0.20
mm
(0.008 In)
Check the fork piston ring (3] for wear or damage.
Check the rebound spring [4 ] for fatigue or damage.
Replace the components if necessary.
Fork pipe bushing/back-up ring
Visually inspect the guide bushing (1].
Replace the guide bushing if there is excessive scoring
or scratching, or if Ihe teflon is worn so that the copper
surface [2] appears on more than 3/4 of the entire
surface.
Check the back-up ring (3), replace it if there is any
distortion al the points (4) indicated by arrows on the
figure.
121
•
/7
141 13J
121
13J
I1J
14J
14·21